Home

Specifications	ZX7550W	ZX7550CW	Specifications	ZX7550W	ZX7550CW	Specifications	ZX7550W	ZX7550CW	Specifications
Table size	900×250mm	900×250mm	Table size	900×250mm	900×250mm	Table size	900×250mm	900×250mm	Table size
Table travel	500×240mm	500×240mm	Table travel	500×240mm	500×240mm	Table travel	500×240mm	500×240mm	Table travel
Vertical travel	380mm	380mm	Vertical travel	380mm	380mm	Vertical travel	380mm	380mm	Vertical travel
Vertical milling capacity	30mm	32mm	Vertical milling capacity	30mm	32mm	Vertical milling capacity	30mm	32mm	Vertical milling capacity
Face milling capacity	120mm	100mm	Face milling capacity	120mm	100mm	Face milling capacity	120mm	100mm	Face milling capacity
Drlng capactity	50mm	50mm	Drlng capactity	50mm	50mm	Drlng capactity	50mm	50mm	Drlng capactity
Longitudinal teeds range	24-720mm/mn	24-720mm/min	Longitudinal teeds range	24-720mm/mn	24-720mm/min	Longitudinal teeds range	24-720mm/mn	24-720mm/min	Longitudinal teeds range
Vertical milling spindle travel	120mm	120mm	Vertical milling spindle travel	120mm	120mm	Vertical milling spindle travel	120mm	120mm	Vertical milling spindle travel
Spindle nose to table surtace	0-380mm	0-3B0mm	Spindle nose to table surtace	0-380mm	0-3B0mm	Spindle nose to table surtace	0-380mm	0-3B0mm	Spindle nose to table surtace
Travel of mowable arm	300mm	300mm	Travel of mowable arm	300mm	300mm	Travel of mowable arm	300mm	300mm	Travel of mowable arm
Vertical miling spindle taper	MI40rRB	MI4	Vertical miling spindle taper	MI40rRB	MI4	Vertical miling spindle taper	MI40rRB	MI4	Vertical miling spindle taper
Horzontal m ng spindle taper	MI4	MI4	Horzontal m ng spindle taper	MI4	MI4	Horzontal m ng spindle taper	MI4	MI4	Horzontal m ng spindle taper
Vertical milling spindle speeds	217-2400r/min	115-1750r/mn 8Level	Vertical milling spindle speeds	217-2400r/min	115-1750r/mn 8Level	Vertical milling spindle speeds	217-2400r/min	115-1750r/mn 8Level	Vertical milling spindle speeds
Horzontalm ng spindle speeds	65-1790rmin	65-1790rmin 9Level	Horzontalm ng spindle speeds	65-1790rmin	65-1790rmin 9Level	Horzontalm ng spindle speeds	65-1790rmin	65-1790rmin 9Level	Horzontalm ng spindle speeds

Specifications	ZX6350F	ZX6350S
Table size	1120×280mm	1120×280mm
T-skot numberhwidihpitch	5/14/50mm	5/14/50mm
Longitudinal travel	640mm	640mm
Cross travel	240mm	240mm
Vertical travel	430mm	430mm
Vertical milling capacity	32mm	32mm
Face miling capacity	100mm	100mm
Dilling capacity	40mm	50mm
Longitudinal feeds range	15.1-266.4mm/min 6 Level	15.1-266.5mm/min6 Level
Cross teeds range	15.1-266.4mm/min 6 Level	15.1-266.5mm/min 6 Level
Vertical milling spindle travel	120mm	120mm
Spindle nose to table surface	100-530mm	100-530mm
Travel of movable arm	360mm	360mm
Vertical milling spindle taper	MT40r RB	MT4
Horizontal milling spindle taper	MT4	MT4
Vertical milling spindle speeds	253-4000cimin8 Level	120-1520r/min 6 Level(115-1750r/min 8 Level)
Horizontal miling spindle speeds	32-1320r/min 12 Level	32-1320r/min 12 Level
Vertical milling motor	1.50.85kw	1.3/1.8kW
Main motor	2.024kw	2.024kw
Overalldmenslons/L×W×H)	1400×1300×2100mm	1400×1300×2100mm
Net weight	1200kg	1300kg

TAG:

Turret milling machine

FAQ

Loader automatically moves forward in neutral.

Troubleshooting methods include: disassembling the forward clutch, thoroughly cleaning the oil passages, and replacing the driving and driven friction plates and other damaged parts. Clean all relevant components and replace the outer sealing ring. Unblock and clean the check valve, and replace the clutch friction plates and inner and outer sealing rings.

Excavator starting and fuel supply issues

If the excavator has difficulty starting, first check the battery power supply and fuel level. Additionally, check the electrical circuits and the connection of the engine starter wires to ensure a smooth start.

Excavator power shortage and abnormal smoke

If the excavator lacks power and emits black smoke, stop working immediately to avoid further damage. Inspect the engine cylinders for damage and take appropriate maintenance measures.

Causes and solutions for excavator stalling during operation

If an excavator suddenly stalls while operating, it may be due to reasons such as low oil level, engine overheating, low coolant level, or overloading. Adjustments and checks should be made according to the specific situation, such as checking the oil level and replenishing it as needed, or adjusting the load to reduce overloading.

The bulldozer cannot start

After normal use and parking, the engine could not be restarted, and no smoke was emitted. The starter motor worked normally, initially indicating a problem in the fuel system. When the manual fuel pump was used, the pumped fuel volume was sufficient, there was no air in the fuel flow, and the manual pump worked quickly. This indicated a normal fuel supply, no blockage in the fuel system, and no air leaks. Given the engine was relatively new, the fuel injection pump (with its seal intact) was unlikely to be faulty. Finally, the engine stop lever was found to be out of position; manually adjusting it allowed the engine to start normally. The fault was determined to be with the solenoid valve. Replacing the solenoid valve resolved the issue, and the engine started normally.

Turret milling machine

FOB PRICE: Negotiable

We guarantee the authenticity and quality of every machine – they are built to stand the test of time – allowing customers to purchase the best quality at the lowest price.

E-mail: hefeitx888@gmail.com

WhatsApp: +86 193 5556 5875

Get Quote

Share to: